Integrated Control Panel: Difference between revisions

From HKVFS Wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
__TOC__
__TOC__
[[File:ICP.png|thumb|450x450px|This is the most common ICP found in the F-16s]]
[[File:ICP.png|thumb|450x450px|This is the most common ICP found in the F-16s (Type1)]]
The Integrated Control Panel (ICP) serves as the primary interface for interacting with the various systems of the F-16 fighter jet. It facilitates critical functions such as weapon activation, navigation settings, and radio communications. When used in conjunction with the [[Data Entry Display]] (DED), which monitors and displays the weapon system's status and operational data, the ICP and DED together streamline the management and operation of the aircraft's complex systems. In essence, the ICP functions like a keyboard, allowing input and command, while the DED acts as a monitor, providing visual feedback and system status updates.
The Integrated Control Panel (ICP) serves as the primary interface for interacting with the various systems of the F-16 fighter jet. It facilitates critical functions such as weapon activation, navigation settings, and radio communications. When used in conjunction with the [[Data Entry Display]] (DED), which monitors and displays the weapon system's status and operational data, the ICP and DED together streamline the management and operation of the aircraft's complex systems. In essence, the ICP functions like a keyboard, allowing input and command, while the DED acts as a monitor, providing visual feedback and system status updates.<br/>
''Note: '''Type(1-3)''' is just for the convenience of distinguishing ICP. IRL does not have type to specify between different ICPs.''
<tabber>
<tabber>
|-|Type 1 (Block 40/42, 50/52, MLU)=
|-|Type 1 (Block 40/42, 50/52, MLU)=
Line 15: Line 16:
| Button
| Button
| -
| -
| Override function, select communication channel 1 for receive and transmit
| Override function, select COM1-page on DED
|-
|-
| COM 2
| COM 2
| Button
| Button
| -
| -
| Override function, select communication channel 2 for receive and transmit
| Override function, select COM2-page on DED
|-
|-
| IFF
| IFF
Line 113: Line 114:
| rowspan="4" | 4-Way stick button
| rowspan="4" | 4-Way stick button
| RTN
| RTN
| Reset
| Reset DED
|-
|-
| UP
| UP
Line 119: Line 120:
|-
|-
| SEQ
| SEQ
| Cycle through subpages and options
| Show/Hide wind speed and wind heading if DED on CNI Base Page, otherwise cycle through subpages and options
|-
|-
| DOWN
| DOWN
Line 192: Line 193:
| Button
| Button
| -
| -
| Override function, select communication channel 1 for receive and transmit
| Override function, select COM1-page on DED
|-
|-
| COM 2
| COM 2
| Button
| Button
| -
| -
| Override function, select communication channel 2 for receive and transmit
| Override function, select COM2-page on DED
|-
|-
| IFF
| IFF
Line 232: Line 233:
| Button
| Button
| -
| -
| [[F-ACK]] if DED on home page, otherwise select key "3"
| [[F-ACK]] if DED on CNI Base Page, otherwise select key "3"
|-
|-
| STPT / 4 / W
| STPT / 4 / W
Line 290: Line 291:
| rowspan="4" | 4-Way stick button
| rowspan="4" | 4-Way stick button
| RTN
| RTN
| Reset
| Reset DED
|-
|-
| UP
| UP
Line 296: Line 297:
|-
|-
| SEQ
| SEQ
| Cycle through subpages and options
| Show/Hide wind speed and wind heading if DED on CNI Base Page, otherwise cycle through subpages and options
|-
|-
| DOWN
| DOWN
Line 369: Line 370:
| Button
| Button
| -
| -
| Override function, select communication channel 1 for receive and transmit
| Override function, select COM1-page on DED
|-
|-
| RED<br />SAT
| RED<br />SAT
| Button
| Button
| -
| -
| Override function, select communication channel 2 for receive and transmit
| Override function, select COM2-page on DED
|-
|-
| IFF
| IFF
Line 409: Line 410:
| Button
| Button
| -
| -
| [[F-ACK]] if DED on home page, otherwise select key "3"
| [[F-ACK]] if DED on CNI Base Page, otherwise select key "3"
|-
|-
| STPT / 4 / W
| STPT / 4 / W
Line 467: Line 468:
| rowspan="4" | 4-Way stick button
| rowspan="4" | 4-Way stick button
| RTN
| RTN
| Reset
| Show/Hide wind speed and wind heading if DED on CNI Base Page, otherwise reset DED
|-
|-
| UP
| UP
Line 473: Line 474:
|-
|-
| SEQ
| SEQ
| Select IFF-page on DED if DED on home page, otherwise cycle through subpages and options
| Select IFF-page on DED if DED on CNI Base Page, otherwise cycle through subpages and options
|-
|-
| DOWN
| DOWN
Line 489: Line 490:
| Reset Warning-flag on HUD
| Reset Warning-flag on HUD
|-
|-
| PLRT
| WX
| Button
| Button
| -
| -
| Toggles between WHOT/BHOT
| Enables TFR weather mode
|-
|-
| rowspan="2" | ^<br />V
| rowspan="2" | ^<br />V

Latest revision as of 03:06, 11 August 2024

This is the most common ICP found in the F-16s (Type1)

The Integrated Control Panel (ICP) serves as the primary interface for interacting with the various systems of the F-16 fighter jet. It facilitates critical functions such as weapon activation, navigation settings, and radio communications. When used in conjunction with the Data Entry Display (DED), which monitors and displays the weapon system's status and operational data, the ICP and DED together streamline the management and operation of the aircraft's complex systems. In essence, the ICP functions like a keyboard, allowing input and command, while the DED acts as a monitor, providing visual feedback and system status updates.
Note: Type(1-3) is just for the convenience of distinguishing ICP. IRL does not have type to specify between different ICPs.

ICP Type1.png

Element Type Position Information
COM 1 Button - Override function, select COM1-page on DED
COM 2 Button - Override function, select COM2-page on DED
IFF Button - Override function select IFF-page on DED
LIST Button - Override function, select List-page on DED
A-A Button - Select Air-to-Air HUD-mode
A-G Button - Select Air-to-Ground HUD-mode
T-ILS / 1 Button - Select T-ILS-page (TACAN/ILS) on DED or key "1"
ALOW / 2 / N Button - Select ALOW-page (Altitude low) on DED or key "2" or "North"
3 Button - Select key "3"
STPT / 4 / W Button - Select STPT-page (Steerpoint) on DED or key "4" or "West"
CRUS / 5 Button - Select CRUS-page (Cruise) on DED or key "5"
TIME / 6 / E Button - Select TIME-page (Time) on DED or key "6" or "East"
MARK / 7 Button - Select MARK-page (Mark) on DED or key "7"
FIX / 8 S Button - Select FIX-page (Fix) on DED or key "8" or "South"
A-CAL / 9 Button - Select A-CAL-page (Altitude calibrate) on DED or key "9"
M-SEL / 0 Button - Select M-SEL-page on DED or key "0"
RCL Button - Select "Recall" or "Backspace"-key
ENTR Button - Select "Enter"-key
^
V 		Seesaw button Trigger Up "Cursor up"-key
Trigger Down "Cursor down"-key
DCS (Data
Command
Switch) 		4-Way stick button RTN Reset DED
UP Cycle through the editable options forward
SEQ Show/Hide wind speed and wind heading if DED on CNI Base Page, otherwise cycle through subpages and options
DOWN Cycle through the editable options backwards
Multifunction
switch 		3-Way switch DRIFT C/O Centres the FPM in the center of HUD
NORM The FPM on HUD is off to one side depending on the prevailing winds
WARN RESET
(trigger) 		Reset Warning-flag on HUD
WX Button - Enables TFR weather mode
^
V 		Seesaw button Trigger Up Configures FLIR manual gain
Trigger Down Configures FLIR manual gain
Multifunction
switch 		3-Way switch GAIN Rocker manually controls FLIR gain
LVL Rocker manually controls FLIR contrast
AUTO Automatically sets FLIR gain/contrast
SYM Rotary pot OFF - 100% Control the brightness of the stroke-written symbology in the HUD
BRT Rotary pot OFF - 100% Controls the intensity of the FLIR video in the HUD
RET DEPR Rotary pot 0 - 100% Positions a manual reticle in the HUD from 0 to 260 milliradian below the boresight of the aircraft
CONT Rotary pot 0 - 100% Controls the contrast of the FLIR video in the HUD

ICP Type2.png

Element Type Position Information
COM 1 Button - Override function, select COM1-page on DED
COM 2 Button - Override function, select COM2-page on DED
IFF Button - Override function, select IFF-page on DED
LIST Button - Override function, select List-page on DED
A-A Button - Select Air-to-Air HUD-mode
A-G Button - Select Air-to-Ground HUD-mode
T-ILS / 1 Button - Select T-ILS-page (TACAN/ILS)on DED or key "1"
ALOW / 2 / N Button - Select ALOW-page (Altitude low) on DED or key "2" or "North"
F-ACK / 3 Button - F-ACK if DED on CNI Base Page, otherwise select key "3"
STPT / 4 / W Button - Select STPT-page (Steerpoint) on DED or key "4" or "West"
CRUS / 5 Button - Select CRUS-page (Cruise) on DED or key "5"
TIME / 6 / E Button - Select TIME-page (Time) on DED or key "6" or "East"
MARK / 7 Button - Select MARK-page (Mark) on DED or key "7"
FIX / 8 S Button - Select FIX-page (Fix) on DED or key "8" or "South"
A-CAL / 9 Button - Select A-CAL-page (Altitude calibrate) on DED or key "9"
M-SEL / 0 Button - Select M-SEL-page on DED or key "0"
RCL Button - Select "Recall" or "Backspace"-key
ENTR Button - Select "Enter"-key
^
V 		Seesaw button Trigger Up "Cursor up"-key
Trigger Down "Cursor down"-key
DCS (Data
Command
Switch) 		4-Way stick button RTN Reset DED
UP Cycle through the editable options forward
SEQ Show/Hide wind speed and wind heading if DED on CNI Base Page, otherwise cycle through subpages and options
DOWN Cycle through the editable options backwards
Multifunction
switch 		3-Way switch DRIFT C/O Centres the FPM in the center of HUD
NORM The FPM on HUD is off to one side depending on the prevailing winds
WARN RESET
(trigger) 		Reset Warning-flag on HUD
PLRT Button - Toggles between WHOT/BHOT
^
V 		Seesaw button Trigger Up Configures FLIR manual gain
Trigger Down Configures FLIR manual gain
Multifunction
switch 		3-Way switch GAIN Rocker manually controls FLIR gain
LVL Rocker manually controls FLIR contrast
AUTO Automatically sets FLIR gain/contrast
SYM Rotary pot OFF - 100% Control the brightness of the stroke-written symbology in the HUD
BRT Rotary pot OFF - 100% Controls the intensity of the FLIR video in the HUD
RET DEPR Rotary pot 0 - 100% Positions a manual reticle in the HUD from 0 to 260 milliradian below the boresight of the aircraft
CONT Rotary pot 0 - 100% Controls the contrast of the FLIR video in the HUD

ICP Type3.png

Element Type Position Information
GRN Button - Override function, select COM1-page on DED
RED
SAT 		Button - Override function, select COM2-page on DED
IFF Button - Override function, select IFF-page on DED
SAK Button - Override function, select L16/DL-page on DED
A-A Button - Select Air-to-Air HUD-mode
A-G Button - Select Air-to-Ground HUD-mode
T-ILS / 1 Button - Select T-ILS-page (TACAN/ILS)on DED or key "1"
ALOW / 2 / N Button - Select ALOW-page (Altitude low) on DED or key "2" or "North"
F-ACK / 3 Button - F-ACK if DED on CNI Base Page, otherwise select key "3"
STPT / 4 / W Button - Select STPT-page (Steerpoint) on DED or key "4" or "West"
CRUS / 5 Button - Select CRUS-page (Cruise) on DED or key "5"
TIME / 6 / E Button - Select TIME-page (Time) on DED or key "6" or "East"
MARK / 7 Button - Select MARK-page (Mark) on DED or key "7"
FIX / 8 S Button - Select FIX-page (Fix) on DED or key "8" or "South"
A-CAL / 9 Button - Select A-CAL-page (Altitude calibrate) on DED or key "9"
M-SEL / 0 Button - Select M-SEL-page on DED or key "0"
RCL Button - Select "Recall" or "Backspace"-key
ENTR Button - Select "Enter"-key
^
V 		Seesaw button Trigger Up "Cursor up"-key
Trigger Down "Cursor down"-key
DCS (Data
Command
Switch) 		4-Way stick button RTN Show/Hide wind speed and wind heading if DED on CNI Base Page, otherwise reset DED
UP Cycle through the editable options forward
SEQ Select IFF-page on DED if DED on CNI Base Page, otherwise cycle through subpages and options
DOWN Cycle through the editable options backwards
Multifunction
switch 		3-Way switch DRIFT C/O Centres the FPM in the center of HUD
NORM The FPM on HUD is off to one side depending on the prevailing winds
WARN RESET
(trigger) 		Reset Warning-flag on HUD
WX Button - Enables TFR weather mode
^
V 		Seesaw button Trigger Up Configures FLIR manual gain
Trigger Down Configures FLIR manual gain
Multifunction
switch 		3-Way switch GAIN Rocker manually controls FLIR gain
LVL Rocker manually controls FLIR contrast
AUTO Automatically sets FLIR gain/contrast
SYM Rotary pot OFF - 100% Control the brightness of the stroke-written symbology in the HUD
BRT Rotary pot OFF - 100% Controls the intensity of the FLIR video in the HUD
RET DEPR Rotary pot 0% - 100% Positions a manual reticle in the HUD from 0 to 260 milliradian below the boresight of the aircraft
CONT Rotary pot 0% - 100% Controls the contrast of the FLIR video in the HUD

Retrieved from "https://wiki.hkvfs.com/index.php?title=Integrated_Control_Panel&oldid=510"