CMDS Control Panel

Revision as of 22:02, 7 August 2024 by Jay (talk | contribs)

There have a few different CMDS Control Panel (CCP) used in F-16s in difference variants.

BAE Systems (Loral) AN/ALE-47(V) TACDS (Threat Adaptive Countermeasures Dispenser System)

 

Element Type Position Function
STATUS Displays NO GO
NO
DISPENSE
RDY
RWR 2-Way switch ON Enable RWR to control CMDS
OFF Disable RWR to control CMDS
JMR 2-Way switch ON Enable JMR to control CMDS
OFF Disable JMR to control CMDS
MWS 2-Way switch ON Enable MWS to control CMDS
OFF Disable MWS to control CMDS
01 2-Way switch ON
OFF
02 2-Way switch ON
OFF
CH 2-Way switch ON Enable CMDS to use chaff
OFF Disable CMDS to use chaff
FL 2-Way switch ON Enable CMDS to use flare
OFF Disable CMDS to use flare
JETT 2-Way switch ON Active flare jettison
OFF Inactive flare jettison
PRGM Rotary switch
(5x36 deg)
BIT
1
2
3
4
MODE Rotary switch
(6x30 deg)
OFF Turn off the CMDS
STBY STBY Mode inhibit the chaff/flare and release to allow pilot to making changes to any CMDS programs in the UFC.
MAN
SEMI
AUTO AUTO Mode allowing CMDS continuously with CMS down until it is explicitly cancelled with a CMS right.
BYP BYP Mode will be exactly one chaff and one flare for any dispense request through CMS. No auto or semi-auto dispense in BYP

TERMA Elektronik ALQ-213(V) EWMS (Electronic Warfare Management System)