CMDS Control Panel

There have a few different CMDS Control Panel (CCP) used in F-16s in difference variants.

BAE Systems (Loral) AN/ALE-47(V) TACDS (Threat Adaptive Countermeasures Dispenser System)

The BAE Systems (Loral) AN/ALE-47(V) TACDS is the most common CCP on F-16s, it have total of 6 chaff/flare programs, programs 1-4 selected on the CCP PRGM Rotary switch, programs 5 activated via the cockpit slap switch and manual, program 6 is also a manual program activated via CMS left.

Element	Type	Position	Function
STATUS	Displays		NO GO
			NO
			DISPENSE
			RDY
RWR	2-Way switch	ON	Enable RWR to control CMDS
		OFF	Disable RWR to control CMDS
JMR	2-Way switch	ON	Enable JMR to control CMDS
		OFF	Disable JMR to control CMDS
MWS (N.I. in BMS)	2-Way switch	ON	Enable MWS to control CMDS
		OFF	Disable MWS to control CMDS
01 (N.I. in BMS)	2-Way switch	ON	NI in BMS
		OFF	NI in BMS
02 (N.I. in BMS)	2-Way switch	ON	NI in BMS
		OFF	NI in BMS
CH	2-Way switch	ON	Enable CMDS to use chaff
		OFF	Disable CMDS to use chaff
FL	2-Way switch	ON	Enable CMDS to use flare
		OFF	Disable CMDS to use flare
JETT	2-Way switch	ON	Active flare jettison and jettison all flare until empty
		OFF	Inactive flare jettison
PRGM	Rotary switch (5x36 deg)	BIT	NI in BMS
		1	Select CMDS to use programs 1
		2	Select CMDS to use programs 2
		3	Select CMDS to use programs 3
		4	Select CMDS to use programs 4
MODE	Rotary switch (6x30 deg)	OFF	Turn off the CMDS
		STBY	STBY Mode inhibit the chaff/flare and release to allow pilot to making changes to any CMDS programs in the UFC
		MAN	MAN allows each press of CMS up result in the relevant program (1-4) being executed only once
		SEMI	Constantly allows the CMDS to run the selected program once only
		AUTO	AUTO Mode allowing CMDS continuously with CMS down until it is explicitly cancelled with a CMS right
		BYP	BYP Mode will be exactly one chaff and one flare for any dispense request through CMS, no auto or semi-auto dispense in BYP

TERMA Elektronik ALQ-213(V) EWMS (Electronic Warfare Management System)